What Is DLS? A Simple Guide After a Rain-Soaked Week of India vs New Zealand ODIs

The Duckworth-Lewis-Stern method adjusts targets when rain cuts into a limited-overs match. Hamilton showed what happens when the weather prevents play altogether.

Tue Nov 10 2026

By Team Apptastic

Quick mode
Switch between full article and quick carousel

dls Rain has followed India and New Zealand through their ODI series, leaving fans to hear the phrase “DLS method” whenever an innings is shortened. The third ODI in Hamilton ended differently. The toss took place, rain kept returning, and the players never bowled a ball. The match was abandoned with no result, leaving India 2-0 ahead in the five-match series. Reuters

So what does DLS actually do? In simple terms, it recalculates a chasing team’s target when weather removes some of the time or overs available. It tries to make the revised target fair by considering how much scoring opportunity each side had. It is a mathematical method, but its basic idea is straightforward: a team with fewer overs should not be expected to score the same total as a team that had a full innings.

What DLS stands for

DLS is short for Duckworth-Lewis-Stern, named after statisticians Frank Duckworth and Tony Lewis, and later statistician Steven Stern, who revised and maintained the method. It is used in limited-overs international cricket and other competitions when rain or another interruption cuts into playing time.

The method works with two main ideas: overs remaining and wickets in hand. Together, these describe a batting side’s resources. A team with many overs left and most of its wickets available has more opportunity to score than a side with only a few overs remaining or several batters dismissed.

DLS uses statistical tables and calculations to estimate the percentage of a team’s scoring resources available at different stages. Match officials use those calculations to set or update a target. Fans do not need to work through the tables to understand the broad principle.

Why overs and wickets both matter

Imagine two teams have ten overs left. One has lost one wicket, while the other has lost seven. They have the same number of overs, but their chances of scoring freely are different. The first team can take more risks because it has batters in reserve. The second may need to protect its remaining wickets.

Now compare two teams with the same number of wickets left, but one has 30 overs remaining and the other has five. Again, their scoring opportunities are very different. DLS accounts for both parts of the situation, rather than simply reducing a target in direct proportion to the overs lost.

That is why a revised target can sometimes look surprising. Losing ten overs does not automatically mean the target falls by one-third. The change depends on how many overs and wickets the batting team had when play stopped, plus how much play remains possible.

What happens when rain interrupts the first innings

If rain interrupts the team batting first, the match may be shortened before that innings is completed. The team could be asked to play fewer overs than originally scheduled. Its eventual score then becomes the total the chasing team must respond to, with DLS used to set a target appropriate to the overs available.

For example, suppose a side is scheduled to bat for 50 overs, but rain means it gets only 35. The second side cannot fairly be asked to chase a target designed for a full 50-over contest while receiving just 35 overs itself. DLS calculates a target that reflects the reduced match length and the resources available to both sides.

The exact target depends on the match situation. A side that has lost several wickets may have fewer resources left than one with the same overs remaining and wickets intact. Officials rely on the calculation rather than a simple percentage guess.

What happens when rain interrupts a chase

A chase is a little easier to picture. Say the team batting second has a target of 260, but rain stops play after 25 overs. If the match can restart with fewer overs, the target may be revised to account for the remaining time and wickets.

If the chase cannot resume, officials compare the chasing team’s score with its DLS par score for that point in the innings. If it is ahead of the par score by at least one run, it has reached a winning position under the method. If it is behind, the team batting first is ahead. If the scores are level with the par score, the match is tied. A competition may also have its own rules for how many overs must be bowled before a result can count.

The “par score” is the score DLS estimates the chasing team should have reached at a given moment, given the overs used and wickets lost. It is not the final target. It is a progress marker that lets officials judge the state of the chase if the match has to stop.

Why the Hamilton washout had no DLS result

The Hamilton match never reached that point. Rain delayed the start, and the match was reduced to 40 overs per side at the toss. But no delivery was bowled before the umpires abandoned the game. There was no first-innings total to chase, no second-innings score to compare with a par score, and no on-field scoring progress for DLS to assess. Reuters · Hindustan Times

The toss decides which side bats or bowls first. It does not give a side a score or create an innings. With no play possible, neither team had an advantage on the scoreboard. The official outcome was therefore no result, rather than a DLS win for India or New Zealand.

That distinction matters. DLS is a way to settle a match that has started and then lost playing time. It does not award a result simply because a match was scheduled, a toss happened, or one team was expected to chase. When conditions prevent any meaningful contest, the match is abandoned.

DLS is a fairness tool, not a prediction

DLS does not forecast what a team would have scored if the weather had stayed clear. It uses historical scoring patterns to make a fair target for the opportunities left. Cricket outcomes still depend on the players, pitch, pressure and decisions in the remaining overs.

For fans, the simplest way to follow a rain-affected chase is to ask three questions. How many overs remain? How many wickets does the batting team have? Is its score above or below the displayed DLS par score? Those details explain why a team can be ahead of par even while trailing the original target, or behind par despite having scored quickly.

The method can feel abstract while rain breaks up a match, but its purpose is practical. It gives both teams a revised target when they have unequal time to bat. Hamilton had no such comparison to make. The players never began, so the only result the weather allowed was no result, with India retaining their 2-0 series lead.

Rain has followed India and New Zealand through their ODI series, leaving fans to hear the phrase “DLS method” whenever an innings is shortened. The third ODI in Hamilton ended differently. The toss took place, rain kept returning, and the players never bowled a ball. The match was abandoned with no result, leaving India 2-0 ahead in the five-match series. Reuters

So what does DLS actually do? In simple terms, it recalculates a chasing team’s target when weather removes some of the time or overs available. It tries to make the revised target fair by considering how much scoring opportunity each side had. It is a mathematical method, but its basic idea is straightforward: a team with fewer overs should not be expected to score the same total as a team that had a full innings.

What DLS stands for

DLS is short for Duckworth-Lewis-Stern, named after statisticians Frank Duckworth and Tony Lewis, and later statistician Steven Stern, who revised and maintained the method. It is used in limited-overs international cricket and other competitions when rain or another interruption cuts into playing time.

The method works with two main ideas: overs remaining and wickets in hand. Together, these describe a batting side’s resources. A team with many overs left and most of its wickets available has more opportunity to score than a side with only a few overs remaining or several batters dismissed.

DLS uses statistical tables and calculations to estimate the percentage of a team’s scoring resources available at different stages. Match officials use those calculations to set or update a target. Fans do not need to work through the tables to understand the broad principle.

Why overs and wickets both matter

Imagine two teams have ten overs left. One has lost one wicket, while the other has lost seven. They have the same number of overs, but their chances of scoring freely are different. The first team can take more risks because it has batters in reserve. The second may need to protect its remaining wickets.

Now compare two teams with the same number of wickets left, but one has 30 overs remaining and the other has five. Again, their scoring opportunities are very different. DLS accounts for both parts of the situation, rather than simply reducing a target in direct proportion to the overs lost.

That is why a revised target can sometimes look surprising. Losing ten overs does not automatically mean the target falls by one-third. The change depends on how many overs and wickets the batting team had when play stopped, plus how much play remains possible.

What happens when rain interrupts the first innings

If rain interrupts the team batting first, the match may be shortened before that innings is completed. The team could be asked to play fewer overs than originally scheduled. Its eventual score then becomes the total the chasing team must respond to, with DLS used to set a target appropriate to the overs available.

For example, suppose a side is scheduled to bat for 50 overs, but rain means it gets only 35. The second side cannot fairly be asked to chase a target designed for a full 50-over contest while receiving just 35 overs itself. DLS calculates a target that reflects the reduced match length and the resources available to both sides.

The exact target depends on the match situation. A side that has lost several wickets may have fewer resources left than one with the same overs remaining and wickets intact. Officials rely on the calculation rather than a simple percentage guess.

What happens when rain interrupts a chase

A chase is a little easier to picture. Say the team batting second has a target of 260, but rain stops play after 25 overs. If the match can restart with fewer overs, the target may be revised to account for the remaining time and wickets.

If the chase cannot resume, officials compare the chasing team’s score with its DLS par score for that point in the innings. If it is ahead of the par score by at least one run, it has reached a winning position under the method. If it is behind, the team batting first is ahead. If the scores are level with the par score, the match is tied. A competition may also have its own rules for how many overs must be bowled before a result can count.

The “par score” is the score DLS estimates the chasing team should have reached at a given moment, given the overs used and wickets lost. It is not the final target. It is a progress marker that lets officials judge the state of the chase if the match has to stop.

Why the Hamilton washout had no DLS result

The Hamilton match never reached that point. Rain delayed the start, and the match was reduced to 40 overs per side at the toss. But no delivery was bowled before the umpires abandoned the game. There was no first-innings total to chase, no second-innings score to compare with a par score, and no on-field scoring progress for DLS to assess. Reuters · Hindustan Times

The toss decides which side bats or bowls first. It does not give a side a score or create an innings. With no play possible, neither team had an advantage on the scoreboard. The official outcome was therefore no result, rather than a DLS win for India or New Zealand.

That distinction matters. DLS is a way to settle a match that has started and then lost playing time. It does not award a result simply because a match was scheduled, a toss happened, or one team was expected to chase. When conditions prevent any meaningful contest, the match is abandoned.

DLS is a fairness tool, not a prediction

DLS does not forecast what a team would have scored if the weather had stayed clear. It uses historical scoring patterns to make a fair target for the opportunities left. Cricket outcomes still depend on the players, pitch, pressure and decisions in the remaining overs.

For fans, the simplest way to follow a rain-affected chase is to ask three questions. How many overs remain? How many wickets does the batting team have? Is its score above or below the displayed DLS par score? Those details explain why a team can be ahead of par even while trailing the original target, or behind par despite having scored quickly.

The method can feel abstract while rain breaks up a match, but its purpose is practical. It gives both teams a revised target when they have unequal time to bat. Hamilton had no such comparison to make. The players never began, so the only result the weather allowed was no result, with India retaining their 2-0 series lead.

Tue Nov 10 2026